Optimus rec-1008 инструкция

Добрый! Для просмотра онлайн использовал до этого на других регистраторах программы GrizzlyVideoPhone или QTqSee или браузер IE, т.к. регистратор был подключен через статический IP и 4G модем. The early reflections from a sound source will lose intensity (decay) much faster in a room with acoustically absorbent wall surfaces than in one which has mostly reflective surfaces. Page 13: Controls And Their Functions, Front Panel Controls and their functions Front panel NATURAL SOUND AV RECEIVER STANDBY/ON A/B/C/D/E BASS TONE PHONES SPEAKERS EXTENSION BYPASS For the remote controller, refer to pages 61 to 68. STANDBY/ON switch Press this switch to turn on the power. Front panel TAPE/MD MON /EXT. Page 40 BASIC OPERATION Switching the input mode for the CD, DVD/LD and TV/DBS sources This unit allows you to switch the input mode for sources that send two or more types of signals to this unit.

Page 27: Antennas Antennas Each antenna should be connected to the designated terminals correctly, as shown in the following figure. Page 49 To enjoy a video source encoded with Dolby Pro Logic Surround, Dolby Digital or DTS When you select the program No. 1, 2 or 3, and the input signal of the source is 2-channel stereo, Dolby Pro Logic Surround is decoded. Dolby Digital provides five full range channels in what is sometimes referred to as a “3/2”… Page 10: Cinema Dsp PCM audio or encoded with the Dolby Digital in 2-channels. There is no connection to these terminals when you use the built-in amplifier.
Page 63 REV. LEVEL (Reverberation Level) This parameter adjusts the volume of the reverberation sound. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT : When connecting this product to accessories and/or another product use only high quality shielded cables. Наши специалисты при установке видеонаблюдения через интернет помогут с получением статического IP адреса. For the keys which are not described here, see “AMP/TUN” on page 62. For details, refer to the instruction manual for each of your components.

Похожие записи: