Инструкция по установке kx-tda100drp

инструкция по установке kx-tda100drp
Telephone Cord Modular To AC Adaptor (KX-A11/KX-TCA1)/ Battery Box (PSZZTD142CE) Install the CS temporarily for the site survey. Notes •… Page 65: Floor Standing (kx-tda200 Only) 2.2.13 Floor Standing (KX-TDA200 Only) Install 4 anchor plugs in the floor, using the metal bracket as a template. Screws Pull the release lever in the direction of the arrow to disconnect the PSU from the back board. Для этого устанавливаем оператора Tenant группы 1, к которой относится внешняя линия. Screw Cover Turn the screw anticlockwise to loosen.


Pull the card from the cabinet to remove it. Installation Manual… Page 53: Handling Of The Cables 2.2 Installation of the Hybrid IP-PBX Handling of the Cables When cables are connected to the Hybrid IP-PBX, run the cables to either right or left and then towards the backside of the cabinet as shown below. Screws Note Make sure the screws are tightened to earth the card securely.

Пожалуйста, перед установкой программы внимательно ознакомьтесь с инструкцией по установке.2. RanderRander 5 В данный дистрибутив включены сервер и клиент Rander, модули интеграции RanCOM и ROA. Внимание! Allow space of at least 20 cm above and 10 cm at the sides of the cabinet. Install 3 anchor plugs in the wall, using the metal bracket as a template.

Похожие записи: